Lamp Change Instructions- 65 Inches - Optoma Rd50 Themescene Bedienungsanleitung

Lamp Change Instructions - 65 inches
For owners of the 65-inch display, please follow the instructions below when replacing the internal
lamp.
Please make sure that the power is properly turned off before continuing.
Remove the speaker covers
Remove the decorative cover as indicated in
the diagram.
Loosen and remove the four screws on the
lamp module's protective cover.
Loosen the three screws on the lamp unit
and pull the lamp unit out. (Note: These
three screws may be loosened but cannot
be removed from the unit.)
Place the new lamp into the original lamp slot.
Once it is secure, tighten the three lamp unit
screws.
Replace the protective cover and tighten the four
outer screws.
Replace the decorative cover.
Replace the speaker covers.
21