Werbung
Installation
SkyVision WS100 can wirelessly transmit high-definition video/audio
contents from devices such as PC, laptop, Blu-ray player, set-top box,
PS3, and Xbox to TV or display*.
* Both source and display device must have HDMI ports
Step 1.
Setup SkyVision WS100 Transmitter
Connect the bundled USB cable to SkyVision WS100 and then connect
SkyVision WS100 and USB cable to the source device. Please plug SkyVision
to source device's HDMI port and plug USB cable to source device's USB
to source device's HDMI port and plug USB cable to source device's USB
port. SkyVision WS100 transmitter's power is supplied from the USB port of
port. SkyVision WS100 transmitter's power is supplied from the USB port of
the source device.
the source device.
Step 2.
Setup SkyVision WS100 Receiver
Connect the bundled power adapter to SkyVision WS100 and insert the power
adapter into a power outlet then connect SkyVision WS100 to the external display
through bundled HDMI cable.
Note:
1. Please make sure your display is in "HDMI" input mode. When the components
are connected correctly and the correct source is selected, the image on the
source device will be showed on the display.
2. It may take a few seconds for SkyVision WS100 to link each other and for the
image on the source device to the display. During the linking period, link LED
indicators on the transmitter and receiver will blink in blue. When linking, link
LED indicators will be solid blue.
3
2
2
1
3
- 8 -
1
Werbung
