Werbung
2. On Screen Display (OSD) Instruction:
The Menu button on SkyVision WS100 receiver allows you to add,
remove, or rename SkyVision WS100 transmitter. You can also
disconnect SkyVision here.
2.1 To add another SkyVision WS100 transmitter or remove existing
SkyVision WS100 transmitter
1. Press Menu button
2. Press Up or Down button to select Settings
3. Press Up or Down button to select Add New Video Source or Remove
Video Source
4. Press Menu button to select video source you want to add or remove
5. Select OK to apply the change
2.2 Disconnect SkyVision WS100
1. Press Menu button
2. Press Up or Down button to select Settings
3. Select Disconnect SkyVision
4. Select OK to apply the change
2.3 Rename SkyVision WS100
1. Press Menu button
2. Press Up or Down button to select Settings
3. Select Rename Video Source
4. Press Menu button to select the video source to be renamed
5. Use Up and Down buttons to move horizontally and highlight the
character to be changed
6. Press Menu button to select the character to be renamed
7. Press Up or Down button to change the character
8. Press Menu button to confirm selected new character
9. Press and hold Menu button to Apply or Cancel Rename Video
Source section
- 7 -
Werbung
