Installation - Buffalo WLI-TX4-AG300N Handbuch

Installation

To connect the WLI-TX4-AG300N Ethernet Converter to your wireless network, you'll
need to configure it with your network's SSID, encryption type, and password. There are
3 different ways to do this:
AOSS - If your wireless access point supports AOSS, then connecting the Ethernet
Converter to your network is very simple. Turn to the next page for instructions on using
AOSS to configure your network settings.
Ethernet Converter Manager - If you have a Windows PC (98/ME/2000/XP/Vista)
available on the local network, then you can use the Ethernet Converter Manager
software on your AirNavigator CD to configure your network settings. Turn to page 8 for
instructions on installing the Ethernet Converter Manager software, and page 14 for how
to use it to connect to your wireless network.
Web Browser - The Web Configuration Tool can be accessed from any computer running
a web browser such as Firefox, Safari, or IE, including Macintosh and Linux machines.
Turn to page 12 for instructions on accessing the Configuration Tool without other
software.
6