Deltaco DUR-900 Bedienungsanleitung Seite 29

10ms
WC06F80
Caps Lock
"Turn on Caps Lock" inverts the letter case in the barcode. Similar to using Caps Lock on a regular keyboard.
Note: If "Keyboard emulation characters mode" or "Change to uppercase/lowercase" is active, this function is not valid.
Example output: If you scan "AbC", the host will receive "aBc".
Turn off Caps Lock
W086000
Change to uppercase/lowercase
If you scan "convert all to uppercase", all the letters in the barcode will change to uppercase.
If you scan "convert all to lowercase", all the letters in the barcode will change to lowercase.
No case conversion
W306F00
Emulate Num Lock
When Num Lock is turned on the scanner converts the numbers 0 to 9 to the Numeric Pad equivalent.
When Num Lock is turned off the scanner does not convert the numbers.
Turn on Num Lock
W046F04
Emulate COM port via USB
Connect the scanner to the host via USB. Scan the "Emulate COM port via USB" barcode to allow the host to receive data
like a serial port. You need to set barcode settings on the scanner to match the host's requirements. A driver for the host is
required for this.
Emulate COM port via USB
W030D02
Enable HID-POS
Features:
1. HID based, no custom driver required.
Note: HID-POS does not require a custom driver. However, a HID interface on Windows 98 does. All HID interfaces employ
standard driver provided by the operating system. Use defaults when installing the driver.
Enable HID-POS
W030D03
Convert all to lowercase
W306F30
28
15ms
WC06FC0
Turn On Caps Lock
W086008
Convert aII to uppercase
Turn off Num Lock
W046F00
W306F20
*
.