Citizen CT-S2000 Benutzerhandbuch Seite 27

Switch No.
Memory SW7-1 Baud Rate
SW7-2 Data Length
SW7-3
SW7-4
SW7-5 Flow Control
SW7-6 DMA Control
SW7-7 VCom Protocol
Memory SW8-1 Print Width
SW8-2 Paper Type
Memory SW9-1 Code Page
Memory SW9-2 International
Memory SW9-3*
SW9-4* JIS/Shift JIS
Memory SW10-1 Print Density
SW10-2 Print Speed
SW10-3 ACK Timing
SW10-4
SW10-5 NV Graphic
* In this printer, Memory Switches 9-3 and 9-4 are not usable.
Manual Setting of Memory Switch (Memory SW)
The memory switch can be selected, changed, or written by the combination of three
actions: pressing the FEED button, pressing and holding the FEED button, and opening
or closing the printer cover.
1. Entering memory switch setting mode.
Set paper to the printer and keep the printer cover open. With the FEED button
pressed and held, turn the printer power on, and then press the FEED button twice.
Close the cover. If the current settings of the memory switch etc. are printed, the
printer is now in the memory switch setting mode.
Memory SW (1) 00000000
Setting Default
19200 bps
8bits
Stop Bit 1bit
Parity NONE
DTR/DSR
Valid
PC Setting
576 dots
1 Color Normal 1 Color Normal, 2 Color Normal
PC437
USA
Character
Kanji OFF
JIS
100%
Level 9
Before Busy
NV User 192K bytes
384K bytes
1200 bps, 2400 bps, 4800 bps, 9600 bps,
19200 bps, 38400 bps, 57600 bps, 115200 bps
7bits, 8bits
1bit, 2bits
NONE, EVEN, ODD
DTR/DSR, XON/XOFF
Valid, Invalid
PC Setting, DTR/DSR, XON/XOFF
360 dots, 384 dots, 420 dots, 432 dots, 436 dots,
512 dots, 576 dots, 640 dots
PC437/Katakana/PC850,858/PC860/PC863/
PC865/PC852/PC866/PC857/WPC1252/PC864/
Thai Code 18
USA, France, Germany, England, Denmark,
Sweden, Italy, Spain, Japan, Norway,
Denmark 2, Spain 2, Latin America, Korea,
Croatia, China
ON, OFF
JIS, Shift JIS
70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%,
110%, 115%, 120%, 125%, 130%, 135%, 140%
Level 1, Level 2, Level 3, Level 4, Level 5,
Level 6, Level 7, Level 8, Level 9
Before Busy, Same Period, After Busy
1K bytes, 64K bytes, 128K bytes, 192K bytes
0 byte, 64K bytes, 128K bytes, 192K bytes,
256K bytes, 320K bytes, 384K bytes
(No indication for 0/1 with memory switch 7 through 10)
— 24 —
Set Values
0: OFF state
1: ON state