Interfacing; Irms With Snmp Network Adapter; Network Configurations - Schrack USMS-S Serie Bedienungsanleitung

6. INTERFACING

6.1 IRMS WITH SNMP NETWORK ADAPTER

The Network Card allows you to connect the IRMS directly to an Ethernet node; the machine is controlled directly using
the SNMP protocol.
The IRMS sends information concerning the status of the system via the network (SNMP TRAP).
3
1. RJ-45 socket for connection to a LAN (Ethernet);
2. Network Card unit RS232 serial socket to configure network parameters (IP address, SNMP communities, etc.);
3. The RESET button allows you to reset the Network Card module
The two LEDs display provides the user/operator with the signals regarding the operating status of the machine.
GREEN LED: link present on the network board

6.2 NETWORK CONFIGURATIONS

To configure Network Card parameters refer to "Network Card User's Manual"
1 2
LAN interface description (Front view)
YELLOW LED: data transfer
7