Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

9.
Pass the strap across the width of the bed frame,
then underneath the bed and then up the other
side.
10. Clip the two parts of the buckle together and
tighten the long strap to remove any slack, ensuring
that the strap is not twisted at any point (see figure
9).
11. Replace the mattress, check that the Bed Rail is
secure and does not move by applying lateral
pressure to the handle.
CLEANING
The Bed Rail should be cleaned using a non-abrasive cleaner or mild detergent with a soft cloth only.
Abrasive cleaners e.g. AJAX and/ or abrasive cleaning pads will seriously damage the product beyond
repair and should not be used. Always ensure that you wipe dry the equipment after cleaning.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components for their
safety.
This includes:
Tightness of all nuts/bolts/castors and other screw in/bolt in/push in components.
Upholstery (if applicable) for security, splits, exposed staples, etc.
Straightness and integrity of all tubing and welds.
If in any doubt, please do not issue or use, but immediately contact your supplier for service
support.
When reissuing, a risk assessment must be undertaken as to the suitability of the bed rail for the
particular user and user's bed.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any concerns.
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part of or establishing
any contractual or other commitment by Aidapt Bathrooms Limited, Aidapt (Wales) Ltd or its agents or
its subsidiaries and no warranty or representation concerning the information is given.
Please exercise common sense and do not take any unnecessary risks when using this product; as the
user you must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the manufacturer
(detailed below) if you have any queries concerning the assembly/use of your product.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9
Telephone: +44 (0) 1744 745 020 • Fax: +44 (0) 1744 745 001 • Web: www.aidapt.co.uk
Email: accounts@aidapt.co.uk • adaptations@aidapt.co.uk • sales@aidapt.co.uk
Fixing and Maintenance Instructions
Figure 9
4
3EX
Ver.5 02/2013 (1008)

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis