Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ADDITIONAL SAFETY
For extra safety when in use, the Bed Rail can be fitted in conjunction with the strap and buckle set
(available separately see figure 3).
To fit the strap and buckle set, please follow the instructions below:
1.
Remove the mattress from the bed.
2.
Turn the Bed Rail upside down so that the top of the handle and the end of the base are on
the bed.
3.
Pass the short strap (with the female buckle connector) under to the centre of the bar on the
base of the Bed Rail closest to the handle and pass the buckle through the 'D' ring (see figure
4). Pull the buckle tight so that the strap is held securely in place against the frame.
4.
Take the long strap and remove the mail buckle connector from the strap (see figure 5 and 6).
6.
Feed the long strap under the centre of the bar on the base of the Bed Rail furthest from the
handle and pass the plain end through the 'D' ring at the other end (see figure 7).
7.
Feed the long strap under the centre of the bar on the base of the Bed Rail furthest from the
handle and pass the plain end through the 'D' ring at the other end (see figure 7).
8.
Re-attach the mail buckle connector to the long strap, turn the Bed Rail back up the right way
and relocate it in its optimum position as set previously.
Fixing and Maintenance Instructions
Figure 3
Figure 5
Figure 7
Figure 4
Figure 6
Figure 8
3
Ver.5 02/2013 (1008)
Werbung
Inhaltsverzeichnis
