Warranty Certificate - Ayce AW140N Bedienungsanleitung

• Welding wire corroded - replace
• Pressure roller adjustment incorrect - adjust.
• Pressure roller sticking-lubricate or replace.
• Wire tangled on reel.
k) Welding output too low,
l) Wire feed speed too low
m) Torch moved too fast.
n) Welding out put too high.
o) Torch moved erratically or too slowly,
p) Earth lead or torch cable in open circuit
q) Poor earth clamp connection.
r) Check mains connection.
s) Check supply fuse.
t) Check torch trigger and it's connections
u) Thermal overload cut out - allow to cool.
DISPOSAL
Do not dispose of power tools into household waste! According
the European Guidline 2012/19/EC for waste Electrical and -
Electronic Equipment and its implementation into national right,
power tools that are no longer usable must be collected
separatly and disposed of in an environmentally correct manner.

WARRANTY CERTIFICATE

Congratulations! You have made an excellent choice with the purchase of this
quality product. Our commitment to quality also includes our service.
Jumbo offers an excellent repair service, exclusivelyin Switzerland for all ayce
Power Tool products.
Should you, contrary to expectations, experience defects due to material or
manufacturing faults during private use within FIVE YEARS of the date of
purchase we shall be liable for warranty in accordance with statutory warranty
regulations, provided that:
- The device was not put to any other use other than the intended.
- Was not overloaded.
- Was not used wit the wrong accessories.
- Repairs where not carried out by other than the authorized work shop.
The warranty certificate is only valid in connection with the receipt. Please
keep both in a safe place. The warranty does not affect your statutory rights.
The product is guaranteed for a period of FIVE YEARS beginning on the day of
purchase. Keep your purchase receipt safe as
proof of the date of purchase. The guarantee
period can only be extended for the duration of any
repair required. During the warranty periode,
defective devices can be returned at every Jumbo
store. We will, at our discretioneither repair or
exchange the device in accordance with warranty
legisation.
Please include the following when returning aour
product for repair:
1. The receipt (proof of purchase)
2. This warranty certificate with your name, address, contact details and a fault
description completed overleaf.
If the original recipt is not enclosed the repair will be charged for in all cases. After
the warranty has expired you can still return defective devices for repairs. Quotes
as well as repaires after warranty period are to be paied for in all cases. This
warranty does not affect your statutoryy rights.
CH Distribution exclusively by:
Jumbo-Markt AG, 8305 Dietlikon
www.jumbo.ch / Tel.: 044 805 61 11
GB
FR
103 | 104 EN