Adjusting The Seat Height - HEPRO ARCTIC 17 Gebrauchsanleitung

5.2 Adjusting the seat height

In order for your Arctic to deliver maximum comfort, it is necessary to adjust the
seat height to suit your needs. This is done as follows:
• Tilt the chair forward so it rests on the leg support and the front of the armrests.
• Loosen the screws so that the actuator bracket moves freely A.
• Loosen the column by opening the screw B.
• Pullout the spring loaded bolt C.
• Move to the desired position
• Release the spring bolt so that it will fit into the nearest hole and lock the column
with the screws. Tighten well.
NB! Make sure the release fastenings do not get too tight, but glide freely. Also
make sure that the fabric strip from the foot pad is moved forward on the seat
plate so that it is not too tight!
A
B
C
Side 34 Side 34