Samson DE10 Handbuch Seite 4

Using the DE10 Microphone
1. Install the microphone cable by connecting it to the screw terminal located at the end
of the boom. Then install the adapter that's correct for your wireless body pack. Be sure
to tighten the locking ring to hold the adapter firmly in place.
2. The headset can be re-sized by sliding
the ear hooks to fit snug around your
head (figure 1).
3. Adjust the microphone position by
pressing the button on the ear hook
and slide the boom forward or back
(figure 2). For optimum performance the
microphone should be close to the skin
and towards the corner of the mouth,
approximately a half inch away.
4. Once the microphone is in position, use
the clothing cable clip to restrain the
cable to ensure the microphone stays in
place.
5. Position the moisture guard ring as close
to the capsule as possible.
6. For outdoor use and to help reduce
p-popping, install one of the included
windscreens.
4
figure 1
figure 2