Herunterladen Inhalt Inhalt Diese Seite drucken

Installation - Sealskin Spazio Installationsvorschrift

Duschwanne
Inhaltsverzeichnis

Werbung

GB

Installation

1.
Turn the tray the right way up again and fit it into place. We recommend protecting the shower tray carefully with a cover
to prevent it being damaged while tiling or doing other work.
2.
Draw a line on the wall to mark the bottom of the edge of the shower tray.
3.
Remove the tray and fix a level hardwood lath or aluminium L-section beam to the wall as an additional support for the
edge.
4.
Apply a generous amount of acrylic sealant along the outside of the tray's edges that will be fitted against a wall. Move
the tray back into its definite location: press it firmly against the wall. Check whether the supports are still in the correct
position.
5.
Next, connect the shower tray's drain up again and check whether the water drains away properly and that the drain is
not leaking anywhere. Make sure that the fall of the drain pipe is at least 1cm per metre of drain pipe. Frequently remove
hairs and dirt that collect in the shower tray's drain during use to avoid a clogged drain.
6.
Allow the sealant to dry for 24 hours.
FR
Montage
1.
Retourner le bac à l'endroit et le mettre en position. Il est recommandé de bien couvrir le bac de douche pour éviter qu'il
ne s'abîme pendant la mise en place des carreaux ou autres travaux.
2.
Tracer une ligne sur le mur pour marquer la partie inférieure du rebord du bac.
3.
Retirer le bac et fixer une latte en bois dur ou un profil L en aluminium à niveau sur le mur en guise de support addition
nel pour le rebord.
4.
Enduire une grande quantité de mastic acrylique sur l'extérieur des côtés du bac qui seront appliqués contre un mur.
Remettre le bac à sa place définitive : l'appuyer fortement contre le mur. Contrôler également si les pieds sont encore en
bonne position.
5.
Raccorder ensuite l'écoulement du bac de douche et contrôler si l'eau s'écoule correctement et s'il n'y a aucune fuite.
Assurez-vous que le tuyau d'écoulement se trouve sur une pente minimale de 1cm par mètre de tuyau d'écoulement.
Pour un bon écoulement de l'eau, retirer régulièrement les cheveux et saletés du bac de douche.
6.
Laisser sécher le mastic pendant 24 heures.
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis