Edirol M-10E Bedienungsanleitung Seite 20

OPERATION
6. Use the SENS knobs to adjust input sensitivity for each channel.
* For minimum noise and/or distortion, set the levels so the OVERLOAD indicators
fig.9e
7. Adjust the L/R input balance of each channel using the BALANCE knobs.
8. Adjust the channel levels relative to one another using the Channel VOLUME
sliders.
9. Set the overall output volume using the MASTER slider.
20
light only briefly on input peaks.
* Use a monaural mic, and connect the mic to channel 1
(MIC) or 3 (MIC).
On the channel to which the mic is connected, turn the
sensitivity knob all the way to the right.