Silva EX-PED GO Bedienungsanleitung Seite 22

6.0 COUNTDOWN TIMER MODE -
USING THE COUNTDOWN TIMER
Target Time
[S/S]
Counting
[S/R] [S/S]
Stop-Counting
Countdown Timer Display
22
target time
(hour, minute, second)
[S/R]
'Zero' Display
Countdown Timer Function Overview
- The measurement unit of the timer is 1
second.
- The target measuring time can be set up
to 23 hours 59 minutes 59 seconds.
How to Set the Countdown Timer
- Set the target time for the countdown
timer, check chapter 4.6 for the details.
How to Measure Countdown Time
- Press [S/S] to start counting down when
the timer is stopped. Press [S/S] to stop
counting down when the timer is counting.
Beep Sounds
The Watch will make the following beeps
during the count down:
- 10, 9, 8, 7 , 6, 5, 4, 3, 2, 1 minute(s)
- 50, 40, 30, 20, 10 second(s)
- 5, 4, 3, 2, 1 second(s)
- Beep for 10 seconds at 0 second.
How to Reload the Timer
- Press [S/R] to reload the timer with the
target time when the timer is stopped.
- Press [S/S] to start counting down when
the timer is stopped. Press [S/S] to stop
counting down when the timer is counting.