Inhaltsverzeichnis
Werbung
ENGLISH (EN)
DG458 - DigiSender® ZX7 - Quad Input 5.8GHz Wireless AV Sender
Using the DigiSender® ZX7
Advanced Functions
Changing the Audio/Video Channel
The DigiSender® ZX7 features 4 Audio/Video Channels. Each of these Audio/Video Channels slightly
changes the frequency on which the DigiSender® ZX7 operates. Because the Audio/Video Channel
switch allows you to 'fine tune' the frequency on which your DigiSender® ZX7 operates, it is possible
to overcome most interference and reception troubles that may occur.
To change the Audio/Video Channel on your DigiSender® ZX7, simply change the position of the
Audio/Video Channel switches to match below.
CHANNEL 1
CHANNEL 2
For your DigiSender® ZX7 to function correctly it is very important that the Audio/Video Channel
settings are the same on both the Transmitter and Receiver and that only 1 switch is down at
any time.
Changing the Remote Relay Channel
The DigiSender® ZX7 combines our advanced DigiEye™ technology with the IR Systeme Technik™
Remote Relay kit and features 16 digital Remote Relay Channels.
To change the Remote Relay Channel on your DigiSender® ZX7, simply change the position of the
Remote Relay Channel switches. Any combination of up and down switches can be used.
For your DigiSender® ZX7 to function correctly it is very important that the Remote Relay Channel
settings are the same on both the Transmitter and Receiver.
Page 12
CHANNEL 3
CHANNEL 4
Please read this instruction manual carefully prior to installation
DG458 - DigiSender® ZX7 - De 5,8 GHz Draadloze AV-Zender met Enkele Ingang
Stap 5 - De DigiSender® ZX7 gebruiken
1.
Schakel de bronapparatuur (satelliettelevisie,
freeview-box, dvd-speler, videorecorder, etc.) in.
3.
1
2
T R A N S
Selecteer ingang 1 door één keer op de aan-uit-
knop op de zender te drukken. De Groen ingangs-
led licht op om aan te geven welke bron actief is.
Druk anders op de zendlocatie op de knop 'Input
1' op de afstandsbediening van de DigiSender®.
NEDERLANDS (NL)
2.
POWER
Schakel de zender en de ontvanger in door op de
voorzijde van de apparaten op de aan-uitknop te
drukken. De aan-uitknop licht Groen op om aan te
geven dat het apparaat is ingeschakeld.
POWER
4.
3
4
Selecteer op de ontvangende televisie het SCART-
kanaal dat is toegewezen aan de SCART-aansluit-
ing die u hebt gebruikt voor de ontvanger. Deze
kan de aanduiding SCART, AUX, AV, VIDEO, VCR
of
hebben.
Page 57
1
1
Werbung
Inhaltsverzeichnis
Fehlerbehebung
