Digisender® Hq2 Advanced Function - AEI Security & Communications DG258 Bedienungsanleitung

ENGLISH (EN)
DG258 - DigiSender® HQ2 - Twin Input 5.8GHz Wireless AV Sender
Using the DigiSender® HQ2
Advanced Functions
Changing the Audio/Video Channel
The DigiSender® HQ2 features 4 Audio/Video Channels. Each of these Audio/Video Channels slightly
changes the frequency on which the DigiSender® HQ2 operates. Because the Audio/Video Channel
switch allows you to 'fine tune' the frequency on which your DigiSender® HQ2 operates, it is possible
to overcome most interference and reception troubles that may occur.
To change the Audio/Video Channel on your DigiSender® HQ2, simply change the position of the
Audio/Video Channel slider switch to 1, 2, 3 or 4.
For your DigiSender® HQ2 to function correctly it is very important that the Audio/Video Channel
settings are the same on both the Transmitter and Receiver.
Changing the Remote Relay Channel
The DigiSender® HQ2 combines our advanced DigiEye™ technology with the IR Systeme Technik™
Remote Relay kit and features 4 digital Remote Relay Channels.
To change the Remote Relay Channel on your DigiSender® HQ2, simply change the position of the
Remote Relay Channel slider switch to 1, 2, 3 or 4.
For your DigiSender® HQ2 to function correctly it is very important that the Remote Relay
Channel settings are the same on both the Transmitter and Receiver.
Page 12 Please read this instruction manual carefully prior to installation