Inhaltsverzeichnis
Werbung
ENGLISH (EN)
DG458 - DigiSender® ZX7 - Quad Input 5.8GHz Wireless AV Sender
Step 4 - Install the Receiver
The Receiver will pick up the signals being sent by your Transmitter and output them to a connected
TV.
1.
Locate a vacant SCART socket on the back of
your receiving TV and insert the DigiSender®
SCART cable.
3.
Connect the Power Supply Unit (PSU) to the
socket labelled 'POWER' on the Receiver.
Page 08
2.
Ensure that the Audio/Video and Remote Relay
Channel switches on the back of the Receiver
are set to 1.
4.
Connect the Power Supply Unit (PSU) to an
available mains socket and switch on at the back
of the Receiver.
Please read this instruction manual carefully prior to installation
Upgrades & Accessoires
Ontvanger - DG45RX
• Voeg zoveel ontvangers toe als u nodig
hebt aan uw DigiSender® systeem
• U hebt een bestaande DigiSender® ZX7-
zender nodig
NEDERLANDS (NL)
DG458 - DigiSender® ZX7 - De 5,8 GHz Draadloze AV-Zender
Page 61
Werbung
Inhaltsverzeichnis
Fehlerbehebung
