Dmx Values - Chauvet SlimPAR QUAD 12 IRC Schnellanleitung

SlimPAR™ QUAD 12 IRC QRG
DMX Linking
Starting Address
Master/Slave
Connection
Infrared Remote
Control

DMX Values

8-CH
Channel Function
4-CH
Channel Function
The SlimPAR™ QUAD 12 IRC can work with a DMX controller when
linked by DMX serial connections. Instructions for connecting and
configuring this product for DMX operation are in the User Manual. If you
are not familiar with DMX, download the DMX Primer from
www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 505 (in the 8-channel DMX personality).
To select the starting address, do the following:
1. Press <MENU> repeatedly until 4-CH or 8-CH shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address (d001~d505).
4. Press <ENTER>.
The SlimPAR™ QUAD 12 IRC uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this
product for Master/Slave operation are in the User Manual.
The SlimPAR™ QUAD 12 IRC is fully compatible with the Infrared
Remote Control (IRC) from CHAUVET®. For more information on the
IRC or to download instructions, go to www.chauvetlighting.com.
1 Red
2 Green
3 Blue
4 Amber
Color Macros
5
(Overrides Chs. 1~4)
Speed
(When Ch. 7
is 032~223)
6
Strobe
7 Mode
8 Dimmer
1 Red
2 Green
3 Blue
4 Amber
Value Percent/Setting
000  255 0~100%
000  255 0~100%
000  255 0~100%
000  255 0~100%
000  015
No function
016  255
Color Macros
000  255 Slow~fast
001  015
No function
016  255
Slow~fast
000  031 RGBA mode
032  063 Pulse effect 0~100%
064  095 Pulse effect 100%~0
096  127 Pulse effect 100%~0~100%
128  159 Auto fade transition
160  191 Auto snap transition (4 colors)
192  223 Auto snap transition (15 colors)
224  255 Sound-active mode
000  255 0~100%
Value Percent/Setting
000  255 0~100%
000  255 0~100%
000  255 0~100%
000  255 0~100%
6
EN