Chauvet SlimPAR QUAD 12 IRC Schnellanleitung Seite 3

EN
Product
Description
Overview
AC Power
Power Linking
Fuse Replacement
The SlimPAR™ QUAD 12 IRC is a low-profile, four-color par can with a
built-in infrared receiver. Like other CHAUVET® pars, the SlimPAR™
QUAD 12 IRC is a silent operator with power linking capabilities. It also
works well in series with other quad-color LED par cans in master/slave
mode and features color customization with or without DMX.
DMX In/Out
Microphone
Sensitivity
Adjustment Knob
Microphone
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 13 SlimPAR™ QUAD 12 IRC products at 120 VAC or
up to 24 units at 230 VAC.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
SlimPAR™ QUAD 12 IRC QRG
Control Panel
LED Display
Safety Loop
Back Panel View
3
Fuse Holder
Power In
Power Out