Controles del amplificador
Input select
PANEL FRONTAL
Cuando se accione el botón de encendido, la luz situada encima se iluminará, indicando que hay corriente . Para apagar
volver a accionar dicho botón en la dirección opuesta . Antes de accionar el botón, poner el volumen bajo para evitar dañar
los altavoces . Nótese que el circuito de protección de los altavoces los deja en silencio unos segundos después de haber
encendido la unidad .
Speaker Outputs
PANEL TRASERO
NOTE:
Although product is pictured without the cage cover, the cage
covering the tubes must be in place during operation. This product
can get hot. Keep away from babies and children
IR receiver LED
Power button
AC Power Input
S-Video Output
MANUAL DEL USUARIO
Volume
Line Inputs
Composite Video Output
!
ATTENTION:
Your iTube should only be
re-started 5 minutes after switching off, to
avoid damaging the tubes.
ESPAÑOL
!
5