Safety Instructions; General Guidelines - Velleman INIA011 Bedienungsanleitung

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal
of the device after its lifecycle could harm the environment.
Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling.
This device should be returned to your distributor or to a local
recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before
bringing this device into service. If the device was damaged in transit, don't
install or use it and contact your dealer.
2.

Safety Instructions

For indoor use only. Keep this device away from rain, moisture,
splashing and dripping liquids. Protect the device against extreme
heat (e.g. direct sunlight, heater ...) and dust.
Keep the device away from children and unauthorised users.
Risk of electric shock.
Improper use of this device can cause damage, shock,
injury or death. Be very careful when measuring live circuits.
There are no user-serviceable parts inside the device.
Refer to an authorized dealer for service and/or spare parts.
• Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for any
ensuing defects or problems.
• Note that damage caused by user modifications to the device is not covered
by the warranty.
• All modifications of the device are forbidden for safety reasons.
• Caution: risk of electroshock when measuring voltages > 35VDC, 25VAC,
currents > 10mA, AC power lines with inductance load and AC power lines
with fluctuating power.
3.

General Guidelines

• Protect this device from shocks and abuse. Avoid brute force when
operating.
• Familiarise yourself with the functions of the device before actually using it.
• Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
• Do not store or use the devices in places with high humidity or
temperature, places where combustible or explosive gasses reside or near
strong magnetic fields.
• Only use the included test leads. When damaged, replace them with test
leads of the same type and with the same specifications.
• Always verify that all connections are reliable and safe.
• Before measuring, always check the selected range. Always use the
device within its specified range.
• Always discharge capacitors and remove power from the device under test
before performing diode, resistance or continuity test.
00 (04/11/2008)
INIA011 (DCM267N)
User manual
3
®
Velleman