Using The Battery Grip - Panasonic DMW-BGG9 Bedienungsanleitung

• Always use a genuine Panasonic DC coupler (DMW-DCC12: optional).
The digital camera can be used without worrying about exhaustion of
battery by connecting the AC adaptor and connect it to the outlet. To use
the AC adaptor, the DC coupler is required.
Note
• When the DC coupler is being mounted, the DC coupler cover opens, so the
structure ceases to be dust-proof and splash-proof. Be careful not to allow
sand, dust and water etc. to adhere to or enter the structure. After use,
check that there is no foreign matter attached to the DC coupler cover, and
close it firmly.
• Also read the operating instructions for the AC adaptor and DC coupler.
• Some optional accessories may not be available in some countries.

Using the battery grip

Operation of the dials, joystick and buttons on the battery grip is same as
the digital camera.
Read the operating instructions for your digital camera for details.
1 Turn the power switch of the digital camera to [ON].
2 Turn the operation ON/OFF switch
on the battery grip to [ON].
• Enables the operations of the dials, joystick
and buttons.
• This cannot turn the power of the digital
camera ON/OFF.
Note
• When the digital camera is held grasping on the grip, a
button on the battery grip may be pushed accidentally.
In such case, turn the operation ON/OFF switch of the
battery grip to [OFF].
10
DVQX1339 (ENG)