Yealink W53P Kurzanleitung Seite 4

W60B Package Contents
W60B Base Station
Assembling the DECT Phone
1. Connect the base station power and the network using method a or
method b.
a. AC Power Option
Note
• If you choose Method a, use Yealink supplied power adapter (5V/600mA).
A third-party power adapter may damage the base station.
• If you choose Method b, you do not need to connect the power adapter.
Make sure the hub/switch is PoE-compliant.
2a. (Desktop Installation) Attach and remove the base stand.
Attach the Base Stand
Align the snap-fits with the corresponding holes
and push forward, snapping them into the holes.
2
Base Stand Power Adapter Ethernet Cable
b. PoE (Power Over Ethernet) Option
Remove the Base Stand
Remove the snap-fits from the
holes horizontally.
Quick Start Guide
IEEE 802.3af compliant
PoE Hub/Switch