Maestro MR601 Bedienungsanleitung Seite 14

Cleaning the container filter.
1. Remove and clean the garbage container as above.
2. Open the cover of the container and remove the filter.
3. Wash the filter under live clean water. Do not use soap, washing
powders or other cleaning abstergents. The use of abstergent will
damage the filter.
4. Allow the filter to dry completely. Install the filter in the cover, and
install the cover in the waste container and into the vacuum cleaner
body until the latch snaps into place.
Cleaning the engine protection filter.
The filter serves to protect the engine from dust. Inspect and, if
necessary, clean the filter.
Cleaning the output filter (HEPA)
This filter is installed in the air outlet grille behind the vacuum
cleaner body. It performs the final cleaning of the air ejected from
the vacuum cleaner.
14