Maestro MR601 Bedienungsanleitung Seite 13

3. While holding the container above the bin, press the button
located on the side of the container, you can shake out the garbage
and clean up the container. Recommendation: if the container is full
of garbage, you can put a plastic bag on it and shake the garbage
inside the package. This will prevent the spillage of dust and debris.
4. Clean the container, inspect it, and if it is necessary to clean the
filter of the container (for more details, see cleaning the filter), also
check and clean the filters. After cleaning, rinse out the container
with water.
5. Allow all parts to dry completely. Install the filter. Install the
garbage container in the cleaner body until the latch snaps into
place. Your vacuum cleaner is ready for use.
For a long and effective work of the vacuum cleaner it is necessary
to clean the filters installed in it regularly. It is better to perform this
procedure at the same time as cleaning the garbage container.
Maintenance of filters
13
EN
Fig.7