Product Description; Power Linking - Chauvet DJ GigBAR LT Kurzanleitung

GigBAR LT QRG
Product
Description
Product Overview
AC Power

Power Linking

Fuse
Replacement
The GigBAR LT is an all-in-one pack-and-go must have for DJs, bands, and other
performers. The GigBAR LT includes two RGB LED moonflower effects, two high-
power tri-color LED PARs, and a white strobe multi-output effect. Easily allows for
separate color and program control of each of the individually adjustable pods. You
can mount up to 4 additional products to the top of the GigBAR LT.
Safety Loop
DMX In/Out Sound Sensitivity
Back Panel View
Microphone
Footswitch
Plug
Front View
This product has an auto-ranging power supply that can work with an input voltage
range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely
disconnect from power via breaker or by unplugging it.
For the maximum number of GigBAR LT products that you can power link at each
voltage, see the User Manual or the sticker on the product.
To replace the fuse in the GigBAR LT:
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace
with a fuse of the exact same type and rating.
5.
Re-insert the fuse holder and reconnect power.
Power Out
LED Display
Knob
Strobe LEDs
IR Sensor
Pars
Moonflowers
3
Fuse Holder
Power In
Menu Buttons IR Sensor
EN