Product Description; Power Linking - Chauvet DJ Intimidator spot led 350 Kurzanleitung

Intimidator™ Spot LED 350 QRG
Product
Description
Product Overview
AC Power

Power Linking

Fuse
Replacement
The Intimidator™ Spot LED 350 is an LED moving head light that has a
motorized focus for crisp gobo effects. Built-in effect macros and
move-in-black features minimize programming time and auto programs generate
easy shows.
Power In
Power Out
Safety Loop
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
You can link up to 3 Intimidator™ Spot LED 350 units at 120 VAC and 7 units
at 230 VAC. You should never exceed this number.
1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
Fuse Holder
Back Panel
Front Panel
Page 3 of 72
DMX In
DMX Out
Control Panel and
Button Menu
EN