DoggyRide Mini Benutzerführer Seite 5

3. Install bike trailer kit
3.1 Install the tow bar
Position the trailer with the rear side on the
floor to point the trailer upward.
Install the tow bar into the holder on the
centre on the front of the trailer. Use the quick
release pin to secure the tow bar. The quick
release pin is secured by a lever.
3.3 Install the hitch to the bike
Unscrew the bolt of the axle or take out the
quick release pin.
Place the hitch over the axle and position the
pin facing backward. Screw the bolt again for
the axle and lock it slightly.
For correct positioning of the hitch to the
trailer for a 28 or 26-inch bicycle ensure the
right angle downward in such a way that the
trailer it horizontally leveled behind the
bicycle.
Now firmly lock the bolt to complete the
installation of the hitch.
Mini
5