DoggyRide Mini Benutzerführer Seite 4

2. Install stroller kit
Attention!
In case you have a DoggyRide Mini
Trailer, you can continue to chapter 3 for
installation of the trailer components
2.1 Install swivel wheel
Position the trailer with the rear side on the
floor to point the front upward. Push the
wheel bar into the holder in the center.
2.2 Secure swivel wheel
Insert the quick release pin into the opening
and secure it. After securing turn the lever to
lock the pin.
2.3 Install the push bar
Position the push bar into the holders on the
rear side of the trailer. Push the pins on both
sides of the holders into the openings to
secure it.
In case you use the product as buggy it is
recommended that the dog is leashed inside.
2.4 Install parking brake
The parking brake is installed on the front of
the left wheel.
Slide the brake over the frame and position it
over the two holes.
Insert the 2 bolts into the holes and secure
the bolts. Use wrench no 10 to secure the
parking brake bolts.
2.5 Use of parking brake
In order to use the brake you have to push
portion with the red cap with your feet. The
brake will now block the wheels. Push with
your feet underneath it to release the brake.
Mini
4