Cleaning And Maintenance; Technical Specifications - HQ Power VDSPROM8 Bedienungsanleitung

5. Overview
Refer to the illustrations on page 2 of this manual.
1 DIGITAL DELAY gain control: effects level adjustment
2 HIGH control (TREBLE): ± 15 dB cut or boost
3 LOW control (BASS): ± 15 dB cut or boost.
4 GAIN control: Channel volume control.
5 LINE input: unbalanced line input, ¼" jack connector.
6 MIC input: balanced input, XLR connector
7 MASTER VOLUME control: volume control for all channels
8 MASTER ECHO VOLUME: echo volume control for all channels
9 EXTERNAL ECHO MODULE: input volume control of an external echo module (not incl.)
10 ECHO TIME control (DELAY): length of the echo effect
11 CD/TAPE IN: input connections for CD player or tape deck
12 CD/TAPE LEVEL control: stereo input volume adjustment
13 7-BAND EQ: frequency adjustment
14 POWER ON/OFF switch
15 VOLTAGE SELECTOR: select between 100 V and 230 V
16 POWER INPUT + FUSE: connection for IEC power cord + fuse (T2A/250V)
17 SPEAKER OUT: mono speaker outputs for 8 Ω speaker boxes, ¼" jack connectors
18 FX LOOP: unbalanced SEND and RETURN connections for loop connection, ¼" jack connectors
6.

Cleaning and maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling,
suspension, trussing) should not be deformed, modified or tampered with e.g. do not drill extra
holes in mounting supports, do not change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician
maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Contact your dealer for spare parts if necessary.
7.

Technical Specifications

power supply
fuse
output power
frequency response
THD
inputs
master equalization
effects
phantom power
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in
the event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit
our website www.hqpower.eu.
The information in this manual is subject to change without prior notice.
20/06/2011
VDSPROM8
230VAC/50Hz
2A - 250V
150W
25Hz - 20KHz
<0.3%
7 x MIC (6V/1k ohm)
8 x line (60mV/15k ohm)
1 x return (300mV/25k ohm)
1 x CD/tape (300mV/25k ohm)
63Hz ~ 16kHz, 7-band, all 3.3k resistor
echo and delay
+15V
420x 285 x 200mm
9kg
4
©Velleman nv