Sri174T Plunge-Cut Saw - Virutex SRI174T Gebrauchsanweisung

muy diferente al valor declarado en otras condiciones
de aplicación, con otros útiles de trabajo o con un
mantenimiento insuficiente de la herramienta eléctrica
y sus útiles, pudiendo llegar a resultar un valor mucho
más elevado debido a su ciclo de trabajo y modo de uso
de la herramienta eléctrica.
Por tanto, es necesario fijar medidas de seguridad de
protección al usuario contra el efecto de las vibraciones,
como pueden ser mantener la herramienta y útiles de
trabajo en perfecto estado y la organización de los
tiempos de los ciclos de trabajo (tales como tiempos
de marcha con la herramienta bajo carga, y tiempos de
marcha de la herramienta en vacío y sin ser utilizada
realmente ya que la reducción de estos últimos puede
disminuir de forma sustancial el valor total de exposición).
17. GARANTÍA
Todas las máquinas electroportátiles VIRUTEX, tienen una
garantía válida de 12 meses a partir del día de suministro,
quedando excluidas todas las manipulaciones o daños
ocasionados por manejos inadecuados o por desgaste
natural de la máquina. Para cualquier reparación, dirigirse
al servicio oficial de asistencia VIRUTEX, S.A.
VIRUTEX se reserva el derecho de modificar sus productos
sin previo aviso.
E N G L I S H

SRI174T PLUNGE-CUT SAW

Important
Read these OPERATING INSTRUCTIONS
and the attached GENERAL SAFETY
INSTRUCTIONS LEAFLET carefully before
using the machine. Make sure you have
understood them before operating the
machine for the first time.
Keep both sets of instructions for any
future queries.
1. SAFETY INSTRUCTIONS FOR USING THE
PLUNGE-CUT CIRCULAR SAW
1.1 GENERAL INSTRUCTIONS
• We recommend that, while using the machine, you
keep the documents relating to it within reach, so that
you can consult them if necessary while working. We
also recommend that if possible, you keep a copy in a
safe place.
• Check the condition of the plug and cable every time
you use the machine.
• Unplug the power supply before handling the machine.
8
• Always keep the cable away from the moving parts
of your machine.
• Only plug into the power socket with the machine
switched off.
• If you need to use an electric extension lead, the wires
must be at least 1 mm
2
be completely unwound.
• Use a blocking device for the piece you are going
to work on whenever possible, so that it does not slip.
• In the event of jamming, turn the machine off imme-
diately and unplug the power supply. Do not resume work
without having removed the cause of the jamming. If this
is inside the machine, give it to an authorised technician.
• Before using an accessory, make sure that its maxi-
mum rotation speed is compatible with the machine's
performance.
• As far as possible, always use protective equipment
such as gloves, goggles, safety shoes, etc. Off-cuts can
lead to injuries.
• Before cutting on a wall, floor or ceiling, make sure
there is no pipework behind it.
• Power tools must not be used by people under 16
years old.
• Only bring the machine in operation near to the piece
being worked on.
• Both above and below the cut path must be free of
obstacles.
• Do not put your fingers in the shavings ejection
nozzle.
• Keep your hands away from the moving saw. Avoid
contact with the saw blade that protrudes from the
lower part of the unit.
• Do not use the machine above your head.
• Do not work with materials containing asbestos.
• Do not use blades with a base disk that is thicker or
with a kerf that is smaller than the thickness of the
dividing knife.
• The cutting guide must be readjusted when changing
circular saws with different diameters.
• When the machine is turned off, wait for the blade
to stop by itself. Never stop the blade by pressing on it
from the side or in the centre.
• Always use the dividing knife.
• Never force a machine that appears to have operating
difficulties or shows some sort of weakness. There may
be a technical problem, in which case continuing to work
could damage the machine irreparably. In all cases where
the machine does not work properly, have it checked by
an authorised agent without delay.
• Use only original accessories.
1. 2 SPECIFIC INSTRUCTIONS
FOR THE MACHINE
CAUTION
in diameter and the cable must