Niceboy PILOT Q8 Bedienungsanleitung Seite 36

Delayed turnoff
Setting the button beeps
Volume
Microphone
Auto time synchro
Time zone
Time setting
Card capacity
Driver's name setting
Format
Factory setting
Version
4) PLAYBACK
Video loop
Emergency Record
Setting the camera turnoff delay. With this function
inactive the camera will automatically turn itself off
once disconnected from power supply. With the
time set, it will automatically turn itself off only after
this span of time runs out.
Activates/deactivates the button beeps and system
beep in response to camera power on/off.
Setting the volume.
Audio recording via microphone on/off.
Setting the automatic data/time synchronization in
line with GPS.
Setting the time zone. With GPS connected the time
is updated automatically, depending on the time
zone setting.
Setting the date & time.
Displaying of total, used, and remaining capacities of
memory card.
Setting the driver's name or vehicle registration
code. As set, the information will be made a part of
the video.
All the data stored on the memory card will be lost.
Camera reset to its factory setting.
Camera system information.
All the videos that have been taken in the cyclic
recording mode will be shown.
All the videos that have been locked during the
recording will be shown. When in the playback
mode you can use the Menu button to erase either
a selected video or all the video (you must have a
pre-selected video).
36