Surface Cleaning - Maunfeld EOEM.769BG Benutzerhandbuch

MAINTENANCE

SURFACE CLEANING

ALUMINUM SURFACES
Use liquid non-abrasive cleaners designed for such surfaces, and a soft cloth.
Apply the product to a damp cloth and wipe the surface. Rinse off the cleaner
with water and wipe dry. Do not apply the cleaner directly to the aluminum
surface.
Do not use abrasive cleaners and sponges for dishes.
Note: ensure that the oven cleaning sprays are not sprayed on the aluminum
surface, as this will cause severe damage to the surface.
FRONT PANEL WITH STAINLESS STEEL PARTS
Use a mild detergent (soap solution) and a soft cloth that does not scratch the
surface. Do not use coarse cleaners or solvents. If the instructions are not
followed, the front panel may be damaged.
PAINTED SURFACES AND PLASTIC PARTS
Do not use abrasive cleaners or appliances, alcohol, or alcohol-based cleaners
to clean the switches, door handles, stickers or nameplates.
Remove stains immediately with a soft cloth and water to avoid damaging the
surface. It is allowed to use other cleaning agents intended for the
maintenance of such surfaces, while following the instructions of the
manufacturer of the cleaning agent.
-32-
www.maunfeld.com