Driving Instructions; Before The Start; Riding; Parking - SoFlow Flowboard Pop Originalbetriebsanleitung

4. Driving instructions

4.1 Before the start

 Choose a flat and open area.
 Prepare the Flowboard Pop according to the manual and adjust the handle bar to comfortable height.
 Wear safety protective devices.
 Make sure all fasteners are secured.

4.2 Riding

1. Press to turn on the power.
2. To ensure safety, put one foot on the pedal and the other foot on the ground, then kick it backwards to make the
Flowboard Pop move forward. Now slowly press the throttle switch.
3. The Flowboard Pop will move forward. Lift the foot from the ground and put it on the pedal, then use the throttle to
speed up the scooter.
4. If you keep riding at a constant speed for 8 seconds, the throttle switch can be loosened and the Flowboard Pop will
enter into cruise control status. Braking or accelerating will stop the cruise control status.

4.3 Parking

1. Release the throttle in your right hand.
2. Move your center of gravity backwards.
3. Squeeze the hand brake slightly and it will cut off the motor power immediately. The drum brake on the rear
wheel will decelerate the Flowboard Pop. After decelerating, put one foot on the ground. Do not brake heavily.
Always brake according to the current road condition.
copyright by www.flowboard.ch 22
Fl