wilux STEAMY LIGHT Bedienungsanleitung Seite 11

Istruzioni Steamy Light 05-04-2004 09:10 Pagina 11
How does the steam bath works
At the internal of the steam outlet you can insert a piece of cotton drenched in essential
oils or other aromatic products before activating the steam bath. ATTENTION: do not
obstruct the steam outlet with the cotton. Do not use alcohol-based products.
If the system is under tension the upper led will be illuminated. Press the key
activate the steam bath. The heater starts filling with water and heating up,
contemporary the lower led will be illuminated. After some minutes the heater starts
blowing steam into the cabin (up till a maximum of 50°C).
When the desired temperature has been reached, press the key
heater.
During the steam bath you can switch on and off the light, pressing the key @@.
ATTENTION
The steam bath will be switched off automatically after 60 minutes of activity and can
only be reactivated after some minutes.
LED AND FUNCTIONS
activation steam bath
if pressed together with the key @@
deactivation steam bath
if pressed during 3 seconds activates the cleaning cycle
if pressed together with the key @@
on / off light
Upper led: if illuminated indicates presence of tension
Lower led: if illuminated indicates steam bath function active
if blinking indicates cleaning cycle active
if blinking slowly indicates anti-calc cycle active
ATTENTION
VERIFY THAT THE CABIN DOOR IS CLOSED AND THAT THERE ARE NO
EXCESSIVE LOSSES OF STEAM WHEN USING THE STEAM BATH.
it activates the anti-calc cycle
it activates the anti-calc cycle
ATTENTION
11
@@ to
@@ to switch off the