Herunterladen Inhalt Inhalt Diese Seite drucken

Whispbar K541W Montageanleitung Seite 8

Basisträgersystem
Vorschau ausblenden Andere Handbücher für K541W:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 13
EN
Fitting Kit
K541W
Fitment
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
Please check the rear of this manual for
information relating specifically to your
vehicle.
Locate vehicle's fixed points.
Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
Clamps directly to edge of roof under the
doors, pin locates in hole on vehicle
Tighten adjusting screw to 5 Nm (3.7 ft lb).
8

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis