Inhaltsverzeichnis; Safety Information - Waterco TC400 Bedienungsanleitung

Table of
SAFETY INFORMATION ---------------------------- 01
SAVE THESE INSTRUCTIONS ----------------------- 02
INSTALLATION --------------------------------------- 03
START UP AND OPERATION ------------------------ 03
Fulflo Cartridge Filter Start Up ---------------- 03
MAINTENANCE --------------------------------------- 04
Cleaning the Fulflo Cartridge Filter ----------- 04
WINTERISING THE FILTER -------------------------- 05
TROUBLE SHOOTING -------------------------------- 06
TECHNICAL SPECIFICATIONS ---------------------- 07

SAFETY INFORMATION

1. Waterco Fulflo Cartridge filters are designed to work with water at a temperature > than
0ºC/32ºF and < than 50ºC/122ºF. The filter should never be operated outside of these
temperatures or damage may occur.
2. The installation should be carried out in accordance to local safety standards and bylaws.
3. Any modification of the filter requires the prior consent from Waterco. Original
replacement parts and accessories authorised by the manufacturer ensure a high level
of safety. Waterco assumes no liability for the damage and injuries caused by unauthorised
replacement parts and accessories.
4. The user should make sure that the installation is carried out by qualified authorised
persons and that these persons have first carefully read the following instructions.
5. The operating safety of the filter is only guaranteed if the installation and operation
instructions are correctly followed.
6. In the event of defective operation or fault, contact Waterco or its nearest authorised
service agent.
7. To reduce the risk of injury, do not permit children to use this product.
8. Incorrectly installed equipment may fail, causing severe injury or property damage.
9. Chemical spills and fumes can weaken Swimming Pool / Spa equipment. Corrosion can
cause filters and other equipment to fail, resulting in severe injury or property damage.
Do not store pool chemicals near your equipment.
I pg 01