LaCie MAX Schnellinstallationsanleitung Seite 6

CAUTION! Changing the RAID configuration mode destroys data stored on the hard disk MAX.
Back up data before following these steps. Before changing the RAID mode, be sure to copy the
User Manual to your computer. If for any reason you lose your User Manual, you can download
it from the the LaCie website: http://www.lacie.com/support/
CAUTION! Disks must be inserted correctly in the hard disk MAX before configuration can be
changed. LaCie recommends limiting contact with the disk drives as much as possible.
NOTE: Refer to the User Manual for information on RAID modes.
Changing the RAID Configuration
1. Unmount or safely remove the hard disk MAX volumes from your computer and turn off the
hard disk MAX. Make sure the disks are cool before touching them.
2. Insert a small, flat-blade screwdriver into the groove on the RAID selection switch and move
the screwdriver up or down to select a different mode.
3. Turn on the hard disk MAX.
4. Reformat the disks (refer to the User Manual for details).