Whispbar K384W Fitting Kit Montageanleitung Seite 8

EN
Fitting Kit
K384W
Fitment
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
Please check the rear of this manual for
information relating specifically to your
vehicle.
Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
Clamps directly to edge of roof under the
doors
Tighten adjusting screw to 5 Nm (3.7 ft lb).
8