Herunterladen Diese Seite drucken

Tempco One H&C RF Montage- Und Bedienungsanleitung Seite 4

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12
GB
This couple (thermostat Tempco and receiver Tempco one H&C) can also be managed by a Central unit Touch E3 to have a full
control of your heating installation from one point. In that case, the receiver works always in automatic regulation mode for the
heating/cooling switch. With the central unit, it is possible to pair the receiver in "Regulation/heating" mode and in "Hydraulic circuit"
mode. It is not possible to pair the receiver in lighting mode or ON/OFF mode.
With a Tempco Digital RF it is possible to configure the receiver in manual mode, heating mode, cooling mode or automatic mode
(Please refer to Tempco Digital RF leaflets).
In all cases, the receiver is making cooling only in comfort mode. All other modes (Reduced, anti-freeze, auto in Reduced) forbid the
cooling regulation.
In case of set point modification, a delay of 5mn is always applied before switching from cooling to heating or heating to cooling. In
automatic regulation, a dead band of ± 1°K with timer is applied before switching from heating to cooling or from cooling to heating.
Compatibility matrix:
Pairing
Regulation
mode
Double free
contact
The receiver is delivered with 2 outputs in free contact mode. To trigger the outputs in live contact linked the live on 1 point of each
connector using the cable supplied in the box.
Tempco One H&C RF Wall Receiver
1. Presentation
Tempco One H&C RF
The
hydraulic heating regulation or cooling regulation.
It embeds a proportional regulation with a time cycle of 10mn. Hysteresis regulation is not
supported.
• The heating relay is used to control a boiler in free contact or a valve or an electric
radiator in live contact. (Available with all thermostats of the Tempco Digital RF/Tempco
Analog RF)
• The cooling relay is used to manage an actuator for a cold water circuit. (Not available
with Tempco Analog RF thermostats)
Regulation/
X
Heating
ON/OFF
Lighting
Hydraulic
X
circuit
Heating
Cooling
Manual
Auto
X
receiver is a Wall mounting receiver, specially designed to control
X
X
X
X
X
4
30
X
X

Werbung

loading