CAME MS-N1009-UT Konfigurations- Und Bedienungsanleitung Seite 40

Camera settings
Before setup, make sure the IP device is connected to the same network as the video
recorder and that the video recorder network settings are correct.
Camera management
Step 1. Access the camera management interface following the path Main menu → Camera
→ Camera Management.
Step 2. Add the IP channel
Method 1. Add the IP channel in the camera search interface
1. Access the camera search interface following the path Main menu → Camera → Camera
Search.
2. Click [Search] to quickly search for IP devices that support ONVIF on the same network
segment as the video recorder.