Input Chainring's Number Of Teeth; Input Sprocket's (Cog Set's) Number Of Teeth - CAMPAGNOLO ErgoBrain Bedienungsanleitung

6. Input chainring's number of teeth. Start with inner chainring.
Push MODE button to increase the digits, and S/S button to decrease.
Push SET button to fix, then the screen moves to the next chainring.
To return to the former chainring, push S/S and MODE button simulta-
neously.
When chainring's setting is completed, the screen moves to the sprock-
et's setting.
Note: If you have selected CDC sensor [ON], the next sprocket setting
is not required; please move to process 8.

7. Input sprocket's (cog set's) number of teeth.

Select the number of teeth from the seven combinations of the cog set.
If your sprockets' combination is not included in these cog sets combi-
nation, select [FREE] and you can input all the sprockets manually.
Note: Sprocket setting should be done individually for wheel A and wheel
B. First, input wheel A's sprocket, and hold down SET button.
The screen moves to wheel B's sprocket setting. Repeat the same
procedure for wheel B.
6
Input chainring's
number of teeth
Button operation
Inner chainring
F1
MODE
Increases the
number of teeth
S/S
Decreases the
number of teeth
Middle chainring
F2
SET
Goes to next gear
S/S MODE
Back to
Outer chainring
previous gear
F3
To the next step
SET
SET
SET
If CDC sensor is OFF
If CDC sensor is ON
SET
SET
7
Input sprocket's
(cog set's)
number of teeth
In case of FREE, input
the number of teeth
manually.
SET
2sec.
Change
Select from 7 types
of combinations
Switch between
combinations
MODE
COG 11-21
COG 11-23
COG 12-21
COG 12-23
COG 13-23
COG 13-26
COG 13-28
F R E E
SET
Top gear R1
SET
Lowest gear R9
UK
- 6