Scale Handling & Usage; Software Updates - iHealth Lina Bedienungsanleitung

your mobile device and the app is running when your weigh-in
occurs. The Scale can store up to 200 weight measurements.
When the memory is full, any new measurements will overwrite
the oldest ones.
SCALE HANDLING & USAGE
• The iHealth Wireless Scale Lina can measure weight up to
180 kg/400 lbs.
• For best results, the Scale should be used on a at, hard surface.
Soft surfaces such as carpets or rugs may a ect the accuracy of
your reading.
• if you wanna measure weight on a soft surfaces, please do it after
you install the 4 foot pads.
• The iHealth Wireless Scale Lina has an automatic shutdown
feature to conserve battery power. The following scenarios will
cause the Scale to go into automatic shutdown mode:
º 45 seconds after nishing a successful weigh-in.
º The battery level is too low to capture an accurate weight
reading.

SOFTWARE UPDATES

From time to time, the Scale's rmware will be updated to enhance
performance. When a software update is available, a noti cation
message will appear in the app. Complete the following steps to
install the update:
ΠFollow the steps in the "First-time Use" section.
 You will see a noti cation message in the app asking for
permission to proceed. Select "Yes".
Ž The update will begin to download. You will see a cursor on the
scale display moving from left to right. The scale will display "0.0"
when the update is completed.
4