Operation - Mondial PREMIUM VIP CARE VP-02 Bedienungshandbuch Und Technischer Kundendienst

FEATURES AND SPECIFICATIONS OF YOUR APPLIANCE
1. Steam nozzle with Stainless Steel base
Steam nozzle cord
2.
U Lock Hose
3.
4. Lock
5. On / Off Button
Steam outlet from body
6.
Body of the product
7.
8. Transport wheels
9. Water tank
Cover with a check valve
10.
Support for clothes/hanger
11.
12. Hanger lock
13. Pole with adjustable height
Hanger with clips
14.
Accessory for creases
15.
16. Brush with long bristles: ideal for fibers.
17. Cushion brush: ideal for fabrics with velvet or chenille.
18. Plug Cord
INTRODUCTION
Thank you for trusting in Mondial. It is the perfect accessory for food lovers. To ensure
proper operation and maintenance of the product, carefully read the instructions in this
manual and keep it in the event that you may need in the future. We recommend that you
also keep the packaging in case of repairs, and dispose of all plastic bags that could
become dangerous toys for children.
The appliance is very easy to use. Just connect it to the electricity supply socket (220-
250V).
If you need more information, please contact Mondial.
Advice:
The use of Mondial appliances by children needs clear instructions of use and
constant supervision during use of the appliance.

OPERATION

The instrument consists of the following parts, see fig.A:
Before using the appliance:
Unpack the appliance.
˃
14 UK E
Clean the outer part of the Steamer with a damp cloth. Dry it well with a soft cloth or
˃
paper towel.
˃ Repeat the operation whenever the Steamer has not been used for a long period of
time.
Assembling instructions
Insert the Pole (13) extension on the Body of the product (7). Tighten the lock until it
1.
is very firm.
2. Insert the Support for hanging clothes (11) on the Pole (13).
Completely extend the Pole (13), locking the safety clip.
3.
To assemble the Hanger (11), simply lift the sides to the lock until they are in the
4.
horizontal position. To disassemble, press the button on the center of the Support
and the sides will automatically close.
Insert the Hose (3) on the Body (7). Turn in the clockwise direction until it locks. Do
5.
not tighten excessively.
6. To use the brushes:
a. Turn off the Steamer and wait for the steam to stop coming out of the Nozzle (1).
Insert the pins of the desired Brush on the Steam Nozzle and press in order for
b.
the lock to fit into the cavity located on the upper part of the Nozzle.
c. To remove the Brush from the Steam Nozzle, simply unlock the accessory and
remove it, removing the pins.
Adding the Crease Accessory:
7.
Turn off the Steamer and wait for the steam to stop coming out of the Nozzle.
a.
b. To assemble the Crease Accessory, it is necessary to insert the clip on the
handle of the Steam Nozzle, pushing it until it is fully secured.
c. To remove the Crease Accessory from the Steam Nozzle, simply pull it out of
the clip fastening handle.
NOTE: The adjustable pole must be completely extended during the operation to
ensure the free flow of steam through the Hose.
Use (See fig.A)
Check to see that the voltage of the appliance is compatible with the local mains
˃
voltage.
˃ Remove the Water Tank from the Steamer, open the cover and put FILTERED OR
DISTILLED WATER.
NOTE: only fill the Tank with cold water. Do NOT use HOT water.
˃ Close the cover and put the Tank back in the product ensuring that it is inserted
properly and firmly in the Body of the appliance.
Make sure the On/Off Button is in the 0 position (off) and then insert the plug from in
˃
power socket.
˃ Press the Button in the T position (on). The Indicator Light will come on indicating
that the steamer is turned on. The steam will start to flow out of the Nozzle in about
45 seconds.
When the water of the product finishes it will automatically turn off, but the light will
˃
still be on. The flow of steam will reduce rapidly until it ceases. To restart, perform
the following steps:
- Press the Button in the "0" position (on).
Remove the tank and fill it up again.
-
UK E 15