Thinknx Micro Inbetriebnahmeanleitung Seite 3

Quick Setup Guide
1. Download and install software
Download from
www.thinknx.com
3. Find server IP address
Open
Server Manager
Browse through
servers
Change network
settings
Run setup.exe
Open
ThinKnx
Configurator
2. Plug in cables
Use only supplied connector to connect
with the KNX bus.
Remove power from server during
electrical connections.
4. Configure Micro server
Open a web browser
and type
http://x.x.x.x:5051
username:
password:
Configure date, time,
language, network
Check firmware
updates
Monitor KNX bus
Login with
service
password