Only for Brickbox: Ground Serial ports (refer to right panel) CTS (Clear To Send - input) RTS (Request To Send - output) Only for Micro Z-Wave: RX (Receive Data - input) TX (Transmit Data - output) USB port for Z-Wave Dongle...
Seite 3
Use only supplied connector to connect Open with the KNX bus. ThinKnx Remove power from server during Configurator electrical connections. 3. Find server IP address 4. Configure Micro server Open a web browser Open and type Server Manager http://x.x.x.x:5051 Login with username:...
Password: password To find the IP address of the server, a search utility is available and can be downloaded from: www.thinknx.com. The server is configured to use DHCP. If DHCP fails, the server will acquire the following address by default: 192.168.0.200.
Seite 5
- USB Z-Wave Transceiver (solo per rispetto della destinazione d'uso. Micro Z-Wave) Prima configurazione Per accedere al software ThinKnx, dopo aver collegato l’hardware in rete, aprire un web browser dove «indirizzo ip» è (si consiglia Firefox o Chrome) e poi la pagina: http://<indirizzo ip>:5051 quello assunto dal server.
Micro Z-Wave) tungdes Bestimmungszwecks verursacht werden. Erstinbetriebnahme Zur Aktivierung der Thinknx Software einen Web Browser öffnen (es wird Fire Fox oder Chrome «IP Adresse» ist die dem empfohlen) und folgende Seite öffnen: http://<IP Adresse>:5051 Server zugewiesene IP-Adresse. Zur erstmaligen Aktivierung folgende Daten eingeben:...
Technical Support If you have technical questions, please contact the Technical Support through the website: www.thinknx.com/support This product must be installed, connected and used in compliance with prevailing standards and/or installation regulations. As standards, specifications and designs develop from time to time, always ask for confirmation of the information given in this publication.
Seite 8
Go Paperless! Recycle with us! Manuals are online entirely designed and made...