Caster Installation - RIDGID 88752 Montageanleitung

DRAWER & CASTER INSTALLATION INSTRUCTIONS
DRAWER INSTALLATION
Step 1:
Install Drawer Slides
NOTE: DRAWER CHOICE models RS22 and RS26
Plan your drawer arrangement first as there are multiple combinations for drawer mounting (fig. 1).
* 88712 Drawer or 88727 Shelf

CASTER INSTALLATION

To install casters, lay the unit on it's back or top. Decide which end is to be steered. Install swivel casters at this end. Bolt all
casters to skids.
Cat.no.
88752 RSC4 4" CASTERS W/ BRAKES
88757 RSC6 6" HD CASTERS W/ BRAKES
93552 RSC6P 6" NON-MARKING POLYETHANE CASTERS W/ BRAKES
(1) Load Ratings are based on caster capacities and do not necessarily reflect load carrying capabilities of the RIDGID Chests, Cabinets or
Rolling Workbenches.
(2) Use for "Low Chest" models only!
NOTES
1. Install padlocks before installing casters to prevent covers or doors from opening.
2. Casters are not intended for use on uneven or rough surfaces, and it is not recommended that caster mounted boxes be
towed behind forklifts or other vehicles. Do not exceed load limits.
Insert Drawer Guides into
Drawer Slides to install Drawer
Fig. 1
Possible Drawer Configurations
CASTER MAX
Step 2:
Top section: 3 options
Bottom section: 7 options
(2)
Step 3:
To Remove Drawer, lift lever
A and press down lever B
LOAD RATING
480 kg (1060 lbs)
1490 kg (3280 lbs)
1000 kg (2240 lbs)
(1)