mixplast STAR FINISH Ion Tech Garantie Und Gebrauchsanweisung Seite 11

Use
Charging the battery:
Before each use, it is advised that the battery is charged for 16 hours in order to maximise battery
life and achieve optimum performance.
The battery reaches its full capacity after various charging cycles.
How to charge the battery :
■ Place in a cool, dry enviroment, away from any products which may be flammable.
■ Plug the charger into (Rep3) as indicated in diagram 1.
■ Switch on the charger.
■ Once charged, unplug the charger.
Battery level
■ The battery LED Rep2 steady light during the work depending on battery charge.
If the battery level is low, only the red light are visible
Battery charging information:
Charging begins as soon as the charger is plugged in. It goes through 2 stages : charging and main-
taining charge.
The table below indicates the LED activity according to the battery level and stages of charge.
During the charge
Once charging is complete (maintaining
charge)
Standby and resumption of work:
► Standby
The device standby when you stop pressing the trigger. All LED are unligth. Battery consomption
is nil.
► Resumption of work
The system works when pressing the trigger Rep1
Should you have any questions, please do not hesitate to contact us via email: mixplast@mix.fr
■ It is not possible to use the device
■ Green LED are flashing
■ Green LED are alight
EN
Page 2