Netspa VITA PREMIUM Installations- Und Bedienungsanleitung Seite 31

Press the filter button to activate the water filtration. The green indicator light will
turn on when the filtration system is activated.
Note:
- If massage function is on, the filtration can't be activated.
Press the heating button to activate water heating and filtering system at the
same time. The green indicator light of filter and red indicator light of heating will
turn on at same time
The pump does not stop heating until the current water temperature reaches the
set temperature; and the heating system will restart after the current water tem-
perature drops 2°C below the set temperature automatically.
Maximum heating temperature: 42°C (107°F)
Important :
When the filtering system has worked 150 hours accumulatively, buzzing
will warn to remind you to clean the filter, at the same time, the light of the
filtering function will flash. You can hold the filtering button 5 seconds to
turn off the buzzing. The filtering system will turn off, you can press the
button to active the filtering system again.
Note :
- The heating system is dependent on the filtration system and it can operate without.
- After turning off the heating system, the filtration system will still work.
- If the massage function is active, the filtration and heating functions can be activated.
EN
31